「沈阳门封」工厂充气门封充气和放气的过程 - 沈阳龙盛物流设备陕西福彩网
沈阳龙盛物流设备陕西福彩网(苏州福盛泰物流设备陕西福彩网东北办事处)
您现在的位置:陕西福彩网>>门封,卸货平台新闻 >> 「沈阳门封」工厂充气门封充气和放气的过程

    「沈阳门封」工厂充气门封充气和放气的过程

    作者:沈阳充气门封批发   发布时间: 2019/6/24 13:22:09

  •  

     

     

    「沈阳门封」工厂充气门封充气和放气的过程


    Inflation and deflation process of inflatable door seal in Shenyang Door Seal Factory
     

     

     



    充气式门罩适合任何大小的运输车辆,并且达到一个极佳的密封效果,阻止外面冷空气进入仓库。


    The inflatable door cover is suitable for transportation vehicles of any size, and achieves an excellent sealing effect, preventing cold air from entering the warehouse outside.


    推荐将此门罩用在冷藏库或对温度要求较高的场所以及装卸时间较长的场合。


    It is recommended that the door cover be used in refrigerated storage or places requiring higher temperature and in places where loading and unloading time is longer.


    充气式门封主要安装在保温要求较高,需要较强密封性的地方。


    The inflatable door seal is mainly installed in the place where the heat preservation requirement is high and the seal is strong.


    在装卸货时,门封的充气气囊会从各个方向紧贴车辆,达到最佳密封效果。


    During loading and unloading, the inflatable air bag of the door seal will close to the vehicle from all directions to achieve the best sealing effect.

     

    沈阳充气门封定做




    气囊材料抗拉抗磨。在装卸货过程中,卡车尾部进入门封,气囊充气保证卡车和建筑物之间良好密封。


    he balloon material is tensile and wear resistant. During loading and unloading, the rear of the truck enters the door seal, and the air bag fills to ensure good sealing between the truck and the building.


    装卸货完成后,气囊放气。


    After loading and unloading, the air bag deflates.


    气囊门封由门封控制模块控制(如果气囊门封有特殊的控制单元)。


    The airbag valve seal is controlled by the control module of the airbag valve (if the airbag valve seal has a special control unit).


    使用这种门封时,建议安装轮胎导向和金属挡板。


    When using this door seal, it is recommended to install tire guide and metal baffle.


    对不同的高度提供最佳的密封性能。


    Provide the best sealing performance for different heights.


    采用可调式顶部设计,减小空气对流,降低冷库温度的损耗达到节能的效果。 配重式平衡系统调节更加轻松。


    The adjustable top design is adopted to reduce air convection and reduce the loss of cold storage temperature to achieve energy-saving effect. Balance system with counterweight can be adjusted more easily.

     

    沈阳充气式门罩厂家

     




    不锈钢滑槽和下拉手柄具有更好的防锈防腐蚀能力。


    Stainless steel chute and pull-down handle have better anti-rust and anti-corrosion ability.


     底部密封块的设计有效地减少车箱低部的空隙,持久耐磨的海绵型固定门封为您减少能源耗支同时有效改善工作环境。


    The design of the bottom sealing block can effectively reduce the gap in the lower part of the car box. The durable and wear-resistant sponge fixed door seal can reduce energy consumption for you and improve the working environment effectively.


    门封采用薄型设计简洁的电镀钢板衬垫,其持久耐用性能无疑远优于传统的木质衬垫。


    Door seals are made of electroplated steel sheet gaskets with thin and concise design. Their durability is undoubtedly much better than that of traditional wooden gaskets.


    另外,独特的减压设计有效减少货台门封与货车之间的磨擦,延长门封面料的使用寿命。


    In addition, the unique decompression design can effectively reduce the friction between the door seal and the truck, and prolong the service life of the door cover material.
     

     

沈阳龙盛物流设备陕西福彩网
(苏州福盛泰物流设备陕西福彩网
东北办事处)
电话:024-31081023
联系人:于经理
网址:www.jiniee.com
版权所有:沈阳龙盛物流设备陕西福彩网
(苏州福盛泰物流设备陕西福彩网东北办事处)
  
电话:024-31081023
联系人:于经理
百度地图 - 网站地图 - 北京福彩网 北京福彩网 北京福彩网 中国竞彩网 无锡体彩网 中国竞彩网 无锡体彩网 北京福彩网 无锡体彩网 北京福彩网